Additional information
Weight | 350 g |
---|---|
Dimensions | 35 × 25 × 2 mm |
Colour | |
Intended Use | |
Manufacturer Part Number | |
Brand |
£40.00
Universal Split/Dual Throttle Motorcycle Cable Kit w/Junction
Please see description below the picture.
Read in full VERY CAREFULLY.
(Any questions please ask before you buy.)
This universal throttle motorcycle cable kit is a high-quality, “Do it yourself” cable kit.
The conduit is spiral wound steel covered with tough black PVCIncludes a low-friction liner made from authentic DuPont.
TeflonGalvanized steel wire for long life and easy soldering.
Suitable for most motorcycle throttle application where the throttle cable connects to the grip and then splits to tow accurate carburettors or throttle bodies
This kit will require some knowledge and skill to fit,:
YOU WILL NEED A SOLDERING KIT
And you will need to cut the wires to your desired length and solder nipples in place.
The ferrules and adjusters are a snug fit. They may be bonded into place , or you can use a centre punch to make a small indention in the side.
The throttle kit includes:
Upper/grip conduit is 1.5 meters (4.9 feet/4 feet 11 inches/59 inches) of 5mm OD black PVC coated, spiral wound, Teflon lined outer conduit Upper/grip wire is 1.75 meters (5.75 feet/5 feet 9 inches/69 inches) of 1.5mm OD galvanized steel wire (7 x 7 strand) Lower/engine conduit is 0.5 meters (1.64 feet/1 foot 7.7 inches/19.7 inches) of 5mm OD black PVC coated, spiral wound, Teflon lined outer conduit Lower/engine wire is 0.75 meters (2.46 feet/2 feet 5.5 inches/29.5 inches) of 1.5mm OD galvanized steel wire (7 x 7 strand) 4 ferrules, 5.5mm OD 4 ferrules, 5mm OD 4 ferrules, 7mm OD 1 throttle grip adjuster screw with nut, M10 x 1.25 x 22mm 1 alloy adjuster screw with nut, M8 x 1.25 x 25mm 1 steel adjuster screw with nut, M6 x 1.00 x 20mm 2 steel adjuster screws with nuts, M6 x 0.75 x 15mm 3 brass barrel nipples, 6mm DIA x 4.2mm (1.7mm bore) 3 brass barrel nipples, 5mm DIA x 7.5mm (1.9mm bore) 3 brass barrel nipples, 5.75mm DIA x 5.5mm (1.9mm bore) 1 brass ball nipple, 5mm DIA 1 brass ball nipple, 6mm DIA 1 tapered neoprene boot, 10mm > 4.5mm ID 4 neoprene boots, 7mm ID 1 splitter assembly, 48mm travel
1 in stock
Weight | 350 g |
---|---|
Dimensions | 35 × 25 × 2 mm |
Colour | |
Intended Use | |
Manufacturer Part Number | |
Brand |