Universal Dual Throttle Motorcycle Cable Kit

Universal Dual Throttle Motorcycle Cable Kit

Please see description below the picture, read in full VERY CAREFULLY.

(Any questions please ask before you buy.)

This universal throttle motorcycle cable kit is a high-quality, “Do it yourself” cable kit.

The conduit is spiral wound steel covered with tough black PVC

Includes a low-friction liner made from authentic DuPont Teflon

Galvanized steel wire for long life and easy soldering

Suitable for most motorcycle throttle application where the throttle is a “push-pull” configuration.

This kit will require some knowledge and skill to fit,:

YOU WILL NEED A SOLDERING KIT

One end of each throttle wire is fitted with a carb nipple (nominally 3mm dia x 3mm). The opposite ends will need to cut to your desired length and solder nipples in place. The ferrules and adjusters are a snug fit. They may be bonded into place , or you can use a centre punch to make a small indention in the side.

What exactly does the kit bundle include?

2 x 1.35 meters (4.4 feet/4 feet 4.8 inches/54.8 inches) of 6mm OD black PVC coated, spiral wound, Teflon lined outer conduit (LB2TS)
2 x 2 meters (6.5 feet/6 feet 6 inches/78 inches) of 1.5mm OD galvanized steel wire (7 x 7 strand) (R77/1)
1 2-piece plastic angled wire guide (2491-02-3787 + 2491-02-3788)
1 ferrule bend with swivel nut, throttle open, “Honda” (FB10125)
1 ferrule bend with swivel nut, throttle close, “Honda” (FB8)
1 ferrule bend with mounting tab, throttle open, “Suzuki” (FB13)
1 ferrule bend with swivel nut, throttle close, “Suzuki” (FB14)
2 ferrule bends, zinc coated (FB22W)
2 ferrules, 5mm OD nose (F82)
2 ferrules, 6.5mm OD nose (F89)
2 ferrules, 5.5mm OD nose with groove (F82G)
2 6mm x 1.00 x 25mm adjusters (2x A6100/25 + 4x LN6100)
1 tapered neoprene double boot (2491.02.3795)
4 neoprene adjuster boots (M5931)
2 brass barrel nipples, 6mm DIA x 10mm (2.1mm bore) (BN610)
2 brass barrel nipples, 6mm DIA x 8mm (2.1mm bore) (BN608)
2 solderless barrel nipples, 6mm DIA x 8mm (BNS6)
2 solderless barrel nipples, 5mm DIA x 7.5mm (BNS575)
2 tab washers (TW6)